750 - 755 - 758 - 756 - 770 - 771 - 778 - 776 - 774 - 724
Both auto winding and stylist line type bobbin case systems
Free Stuff
These links will open in Adobe Acrobat Reader, or other PDF compatible reader
Above is a link for the free reader should you need to download it
758 - 778 Schematic
Threading
Bobbin Winding
758E Schematic
700 T&S Schematics
756 Schematic
750E T&S Schematic
1060 Schematic
750-13 T&S Schematic
719 Schematic
714-717-719-724-734-774-776Schematic
Clam Shell Controller Repair - Non Solid State - 8 Pages
Controller not performing like it use to, getting hot to the old foot, or just
started running at high speed all the time?
It may have burnt contact springs, or worn carbon element
This guide will help you inspect, repair, and get it going again
$4.95
700 Series T&S Tension Repair Guide $4.95
6 Pages showing you how to take apart the tension unit, check for broken parts, re-assemble
and adjust for proper basic tension settings   (Download Only)
My Own Repair Manual - 73 Pages of Information   (download only)
Covers All These Items & More - For US Made Touch & Sew
Needle To Hook Timing, Feed Timing, Top Tension Repair, Buttonholer Repair, Bobbin Winder
Adjustment, Bobbin Case Adjustment, How To Remove the Main Shaft and change the Timing Belt,
plus lots more.  Some items may apply to German/European models, ask first
I do suggest the Factory Guide as well, as there are things covered in it that mine does not cover, so
armed with both, you should be able to tackle a Touch & Sew problem.
$19.95
Approx
3megs
Motor Service Guide - 9 Pages
Motor running sluggish - here is your answer.  This guide will help you take the entire
motor apart, inspect, repair and put it all back together again (Download Only)
$4.95
Counter
Timing Guide
$7.95
700 Series Touch & Sew - Hook to Needle & Feed Timing Guide
7 Pages, complete with pictures and instructions on how to time any 700 Series T&S
Note: If you have ordered the guide just above, you may not require this guide, timing is
included in the other guide                (Download Only)
Bobbin Case Inspection
$0.85
Touch & Sew Bobbins -163131S - Original Singer T&S Bobbin
Fits: All T&S 600 - 700 with auto wind system.  Also fits 1411 & 1425
In Stock
 Yes Usually ships in 2-3 business days
Each

979314-031 Electronic Foot Control with 3 Pin Cord
Fits: Non-Solid State T&S: 758-756-778-776-774-724-Inquire if
not sure - provide model number
 $34.95
In Stock
Yes Usually ships in 2-3 business days
I did my own gears on my stylist 534 with Terry's instructions and I had no problems at all.  I did lay all the
parts on a tray with a towel on it, so I put it back together in the same order I took it apart.  A small
flashlight to see into tight spots and some uninterrupted time to spend on my machine was very helpful.  I say
go for it. Forget the repair guy.  I did this myself after sending it to the shop one year to have gears done.
They only did one and charged me $110.  I even asked them to replace the other one if it looked bad.The next
year the gear that meshed with the first one died. No way was I spending that kind of money for another gear.
I take better care of my own machine, thanks to Terry and the help of this group.
Sandy in NC
Testimonials
Bobbin Case Position Bracket Setting
Bobbin Case Removal
SR-750 Instruction Book Singer 750 Golden T&S
Manual will may also serve as a book for a 770 - 775 - 755
Picture shown for representative purposes only, actual manual is a scan
copy from originals, and shipped as I received them from the vendor
 $11.95
In Stock
 No Usually ships in 2-3 business days
174198 General Purpose Needle Plate
Fits: All 700 Series US Made Touch & Sews 750 - 758 - 756 - 770 - 775 - 778 -
776 - 724 - 774.  Does Not Fit: 1060 - 1200 - 2000 - 2005 Series
No Cut Out For the Safety Over Ride Switch
Can Be Modified To Fit The Electronics, you must modify yourself
$9.50
In Stock
 Yes Usually ships in 2-3 business days
700 T&S Top Tension - Theory Of Operation
750/770 Top Hat/Pattern Cams
700 Series Item
Repair Guides, Instruction Book 750/770 & Simple Parts - See Gears Page for Gears
SM-750 Factory Repair Guide - 40 pages - Is Downloadable
In combination with my own guide, you should be able to repair just about any
problem your 750 may have.  Both guides also apply to models:
770 - 775 - 771 - 756 - 758 - 778 - Hard Copy will be mailed as well
Some differences in the bobbin case system but the 774 - 776 - 719 - 717 - 724
$14.50
In Stock
 No Usually ships in 2-3 business days
172599-001 Reverse Lever - Fits all 700 Series T&S
The reverse lever is not an easy part to change, one does have to remove
the buttonholer unit.  I would suggest my own repair guide along with this
item.  I do cover taking the buttonholer apart, and making repairs to it
$9.75
In Stock
 Yes Usually ships in 2-3 business days
382437 Position Bracket
Bobbin Case Position Bracket - Fits all 700 Series T&S with auto wind
bobbin.  Does not fit T&S Apollo Bobbin case systems
$3.25
In Stock
 Yes Usually ships in 2-3 business days
163636 Bobbin Winder Unit
Fits all 700 Series Apollo Bobbin Case type systems
Models: 714 - 717 - 719 - 724 - 734 - 774 - 776
$18.95
In Stock
 Yes Usually ships in 2-3 business days
163246 Hook Driver / Bobbin Winder
Fits All 620 - 630 - 640 & 700 T&S with Auto Wind Bobbin Series
May not fit 600 - 603 T&S's, those originally had a longer shaft, not available
$19.95
In Stock
 Yes Usually ships in 2-3 business days
153022 Position Finger - Bobbin Case
Other Part Numbers know by: 172950 - 174230 - 383471
Fits All 700 Series with Auto Wind Bobbin
$1.20
In Stock
 Yes Usually ships in 2-3 business days